APPLICATIONS
◯Construction wooden works such as floor and wall framing roof decking, and subflooring.
◯Mobile and modular home construction.
◯Making wooden boxes, pallets, and drums.
◯Packing operations in manufacturing plants, and other types of packing and crating work in general.
BEFORE OPERATION
Read section titled Safety (Page 4 - 6)
Make sure of the followings before operation.
WORKING ENVIRONMENT
WARNING
⬤No flammable gas, liquid or other flammable objects at worksite.
⬤Clear the area of children or unauthorized personnel.
AIR SUPPLY
DANGER
⬤Never use oxygen, combustible gases or any other bottled gases.
WARNING
⬤Never connect Nailer to pressure which potentially exceeds 200 psi (13.7 bar 14 kgf/cm2).
⬤Never use non relieving coupler on Nailer.
1.Power source
◯ Use only clean, dry, regulated compressed air as a power source for this Nailer.
◯ Air compressors used to supply compressed air to this Nailer must comply with the requirements of 0the latest version of ANSI Standard B 19.3 Safety Standard For Compressors For Process Industries.
◯ Moisture or oil in the air compressor may accelerate wear and corrosion in the Nailer. ◯ Drain daily.
2.Filter-Regulator-Lubricator
◯ Use a regulator with a pressure range of 0 – 120 psi (0 – 8.3 bar 0 – 8.5 kgf/cm2).
◯
Filter | The filter removes moisture and dirt mixed in compressed air. |
| Drain daily unless fitted with an automatic drain. |
| Keep the filter clean by regular maintenance. |
Regulator | The regulator controls the operating pressure for safe operation of the Nailer. |
| Inspect the regulator before operation to be sure it operates properly. |
Lubricator | The lubricator supplies an oil mist to the Nailer. |
| Inspect the lubricator before operation to be sure the supply of lubricant is adequate. |
| Use Hitachi pneumatic tool lubricant. |
Regulator
Nailer Side 
Compressor Side
Filter
Lubricator
– 9 –
