Adjusting the nailing depth
To assure that each nail penetrate to the same depth, be sure that
(1)the air pressure to the Nailer remains constant(regulator is installed and working properly)
(2)the Nailer is always held firmly against the workpiece.
If nails are driven too deep or shallow into the workpiece, adjust the nailing depth in the following order.
1 DISCONNECT AIR HOSE FROM NAILER
2 If nails are driven too deep, turn the adjuster to the shallow side. If nails are driven too shallow, turn the adjuster to the deep side.
Lock | � |
|
|
ロック | Flush | Too deep Too shallow | |
| |||
|
|
Free |
| ( | ) | Shallow |
� |
|
|
| |
| フリー | ( | ) | Deep |
|
|
Adjuster
3Stop turning the adjuster when a suitable position is reached for a nailing test.
4 Connect the air horse
ALWAYS WEAR EYE PROTECTOR. Perform a nailing test.
5 DISCONNECT AIR HOSE FROM NAILER
6 Choose a suitable position for the nailer.
Changing the exhaust direction
The direction of the exhaust vent can be changed by turning the head ring.
Top cover
Exhaust vent 
Direction
Cutting off the sheet
Tear off the output sheet in the direction of the arrow when using the sheet collated nails.
Plastic sheet
– 15 –
