Operating
Using the partial magnify feature
Press the ON button of MAGNIFY on the remote control. |
|
|
|
1. The “MAGNIFY” indication will appear on the screen |
| ASPECT | AUTO BLANK |
| ON MAGNIFY | VOLUME | |
(although the indication will disappear after several |
|
| MUTE |
seconds with no operation), and the projector will enter | - + | OFF |
|
| FREEZE | KEYSTONE | |
the MAGNIFY mode. |
|
|
|
2. Use the cursor buttons ▲/▼ to adjust the zoom level.
To move the zoom area, press the POSITION button in the MAGNIFY mode, then use the cursor buttons ▲/▼/◄/►. And to finalize the zoom area, press the POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control.
●The projector automatically exits the MAGNIFY mode when the input signal is changed, or when the display condition is changed (automatic adjustment, etc. is executed.)
●Although the keystone distortion condition may vary in the MAGNIFY mode, it will be restored when the projector exits the MAGNIFY mode.
●Setting the WIDE mode may limit the magnify range. (23, 36)
Freezing the screen
Press the FREEZE button on the remote control. | ON |
|
1. The “FREEZE” indication will appear on the screen, and | MAGNIFY | VOLUME |
| ||
OFF | MUTE | |
the projector will enter the FREEZE mode. | FREEZE | KEYSTONE |
To exit the FREEZE mode and restore the screen to | - + |
|
| - ZOOM + | |
normal, press the FREEZE button again. |
|
|
●The projector automatically exits the FREEZE mode when the input signal is changed, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, MUTE, KEYSTONE, POSITION and MENU is pressed.
●If the projector continues projecting a still image for long time, the LCD panel might possibly be printed. Do not leave the projector in the FREEZE mode for too long.
26
