Multifunctional settings
OPTION menu (continued)
Item |
| Description |
|
| |
| The filter time is the time counted after the last resetting. It is shown | |
| in the OPTION menu as the usage time of the air filter. Performing | |
| this item resets the time. |
|
| Pressing the RESET button on the remote control or the button ► | |
| on the projector displays a dialog to make sure. | |
FILTER TIME | To perform reset, point at RESET using the button ▲. | |
| FILTER TIME | |
| RESET CANCEL | 0h. |
| RESET | |
|
| CANCEL |
•Please reset the filter time only when you have cleaned or replaced the lamp, for a suitable indication about the air filter.
•For the air filter care, please see the section "Air filter". (50)
| Choosing this item displays the SERVICE menu. | SERVICE | :SELECT | |
| Choose an item using the buttons ▲/▼, and | FANSPEED | NORMAL | |
| press the button ► or the ENTER button to | AUTO ADJUST |
| |
| GHOST |
| ||
| execute the item. |
| FILTER MESSAGE 100h. | |
|
|
| FACTORY RESET EXECUTE | |
| FAN SPEED AUTO ADJUST GHOST |
| ||
| FACTORY RESET FILTER MESSAGE |
|
| |
| FAN SPEED |
|
|
|
| Using the buttons ▲/▼ switches the rotation speed of the cooling | |||
| fans. |
|
|
|
| HIGH NORMAL | FANSPEED |
|
|
| HIGH |
|
| |
|
| NORMAL |
|
|
SERVICE | The HIGH is the mode for use at highlands etc. |
|
| |
•Note that the projector is noisier when the HIGH is selected.
•Except for use at highlands, please use setting the NORMAL mode. The HIGH mode may shorten the lifetimes of the lamp.
| AUTO ADJUST |
| |
| Using the buttons ▲/▼ enables or disables the automatic | ||
| adjustment. |
| |
| ENABLE DISABLE | AUTO ADJUST | |
| ENABLE | ||
|
| DISABLE | |
| Depending on conditions, such as input image, signal cable to the | ||
| unit, environment around the unit, etc. the automatic adjustment | ||
| may not work correctly. |
| |
(to be continued) | In such a case, please choose DISABLE to disable the automatic | ||
adjustment, and make adjustment manually. | |||
| |||
ENGLISH
45
