Hitachi PJ-LC9 user manual IMAGE menu, Description, Aspect, For a 16 9 signal, For a 4 3 signal

Multifunctional settings

IMAGE menu

With the IMAGE menu, the items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	ASPECT	4:3
IMAGE	OVER SCAN	5
INPUT	V POSITION	25
SETUP	H POSITION	142
SCREEN	H PHASE	16
OPTION	H SIZE	1344
EASY MENU	AUTO ADJUST EXECUTE

Item

Description

ASPECT

Using the buttons ▲/▼ switches the mode for aspect ratio.

For a 16:9 signal

4:3 16:9 WIDE MOVIE1 MOVIE2

For a 4:3 signal

4:3 16:9 WIDE MOVIE1 MOVIE2

For an RGB signal

4:3  16:9  NORMAL

For a video signal, s-video signal or component video signal 4:3  16:9  WIDE  MOVIE1  MOVIE2

For no signal 4:3  16:9

•The NORMAL mode keeps the original aspect ratio of the signal.

•For an HDTV component video signal of 1125i (1080i) or 750p (720p), this item cannot be chosen.

•Performing the automatic adjustment initializes the aspect ratio setting.

•While setting the WIDE mode, the correction of keystone distortion is not effective. (25, 40)

•Setting the WIDE mode may limit the magnify range. (26)

36