Hitachi PJ-LC9 Warranty and after-service, Specifications, RGB input, Communication port

Warranty and after-service / Specifications

Warranty and after-service

If a problem occurs with the equipment, first refer to the “Troubleshooting” (53~57) and run through the suggested checks.

If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Specifications

		Item		Specification
Product name				Liquid crystal projector
Liquid		Panel size		1.4 cm (0.55 type)
Crystal	Drive system			TFT active matrix
panel
		Pixels		415,272 pixels (858 horizontal x 484 vertical)
Lens				F=1.65 f=20.4 mm
Lamp				165W UHB
Power Supply				AC100-120V/2.7A, AC220-240V/1.5A
Power Consumption				240W
Temperature range				5 ~ 35°C (Operating)
				285 (W) x 73 (H) x 202 (D) mm
Size				(Not including protruding parts)
				• Please refer to the following figure.
Weight (mass)				2.2 kg
				RGB input:
				RGB.......D-sub 15pin mini x 1
				Communication port:
Ports				CONTROL.......... D-sub 9pin x 1
				Video input:
				VIDEO ...................... RCA x 1
				S-VIDEO ............. S-Video x 1
				Audio input:
				AUDIO ........... Stereo mini x 1
Optional			Lamp	DT00707
			Air filter	NJ22642
parts
			Others	• Please consult your dealer.

NOTE • These specifications are subject to change without notice.

58