Operating
Adjusting the position
Press the POSITION button on the remote control. |
|
|
1. The “POSITION” indication will appear on the screen. |
| - ZOOM + |
- | MENU | |
| POSITION |
Use the cursor buttons ▲/▼/◄/► to adjust the picture | ENTER |
| |
2. position. |
|
When you want to reset the operation, press the RESET button on the remote | |
control during the operation. To complete this operation, press the POSITION | |
button again. Even if you do not do anything, the dialog will automatically | |
disappear after a few seconds. |
|
●When this function is performed for a video signal, a certain extra such as a line may appear outside a picture.
ENGLISH
Correcting the keystone distortions
1.
2.
Press the KEYSTONE button on the remote control. | ON |
|
| MAGNIFY | VOLUME |
A dialog will appear on the screen to aid you in correcting |
| MUTE |
the distortion. | OFF |
|
- + |
| |
| FREEZE | KEYSTONE |
Use the cursor buttons ▲/▼ to correct the distortion. To close the dialog and complete this operation, press
the KEYSTONE button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
●The adjustable range for correction will vary among inputs. For some signals, this function may not work well.
●While setting the WIDE mode for aspect ratio, the correction of keystone distortion is not effective. (23, 36)
25