![](/images/new-backgrounds/1079323/7932395x1.webp)
HOW TO REMOVE PARTS
Height adjustable shelf・Lower shelf
Slightly lift up the
1 back of the shelf
and draw it.
Raise the shelf as
2 shown in figure, and turn it and remove it.
When installing the shelf, slide it until it reaches to the interior wall, then slightly lift up the back of the shelf and push it in. (hitch the forks of the shelf to the parts on the back of the shelf)
Caution Door may damage if drawing the shelf without turning it.
Fixed shelf
● Draw the shelf, and pull off the two pins on the lower right and remove it.
Reversible shelf
● Slightly lift up and pull out.
Chill room
●Pull out the case to the full, lift the front side slightly and then remove it.
Slide case
48