Reassembly
1.Angle left shroud half (5) into base and push down into place. Then replace right shroud half (7).
5
ti9015a
2.Replace and tighten second screw (30).
30
ti9283a
3.Swing access door down (RTX 1250) and tighten knob (42).
42
ti8938a
4.Tighten screw (70) into lower right corner of side access plate.
70
ti8874a
Shroud Removal
5.Replace toolbox (2) and tighten screws (30) and screw (31).
31
2
30
ti8884a
6.Tighten screws (31) on shroud. 31
ti8882a
7.Spread handle bars apart and slide handle down into place.
8.Tighten 2 knobs (14) on sprayer handle (12).
12
14
ti8875a
9.Replace hopper and tighten hopper fitting by hand until snug.
8 | 311772G |