Reassembly
1.Insert new cooling tube fitting and use 5/8 in. wrench to tighten.
Cooling Tube
3.Rotate cooling tube around and insert free end into
ti8942a
2.Insert cooling tube (79) and push into new fitting (86). Make sure tube is fully seated.
ti9014a
4.Replace screw (101) and washer (102) under cool- ing tube (79) and use 3/8 in. socket to tighten.
79
86
79
ti8895a
102
101
ti8886a
CAUTION
When replacing cooling tube, make sure coil is facing up when you push the tubing into the fitting. If you push from any other angle you could bend or damage the tube.
5.Replace Compressor; page 12.
6.Replace RotoFlex™ II Pump hose; page 9 or 10.
7.Replace Shroud, page 7.
20 | 311772G |
