8CHAPTER 1: OVERVIEW
Installation Checklist This section contains a checklist for installing software and booting a NETBuilder II system with a DPE module.
Install System Software and Boot — See Chapter 2.
❑Install software from a flash memory card.
Change the Primary Boot Source — See Chapter 3.
❑Change the primary boot source default as needed.
Configure Basic Settings — See Chapter 4.
❑Log on to the system.
❑Familiarize yourself with the
❑Obtain Network Manager privilege level.
❑Change the Network Manager password.
❑Adjust the time and date if necessary. Time and date are preset and may need to be adjusted for your time zone.
❑Set system administrator information:
❑System name and location
❑System contact name and phone number
❑Login banner
❑Assign IP addresses/subnet masks to individual ports or one address to the system.
❑Set up the bridge/router for SNMP.
❑Set up system security.
❑Use the
Configure Specific Services for Your Network — See Using Enterprise OS
Software and Reference for Enterprise OS Software.
