Hitachi UT32A302 Safety Precautions Wall Mount Setup, Remove the Stand Base from the Monitor

SAFETY PRECAUTIONS (continued)

Wall Mount Setup

1 Remove the Stand Base from the Monitor

About the Installation

This product is heavy and should be carried by at least 2 people.

	Please make sure screws are
WARNING	tightened properly.
	The torque should be 1.8~3.0
	N.m (18~30 kgf.cm).

Keep the screws. They may CAUTION be used for the Wall Mount

installation.

Remove the 4 screws and raise straight up from tabletop stand.

2	Install the Wall Mount Brackets on the Monitor using 4 screws (Screws
	Specification is shown below ).	Screw Length (A)
	Screw Mounting Holes (4 places).Don't	Insertion length (B)
	use the original flat head screws (A) that
	comes in the monitor, for the Wall Mount
	Braket. The length is not long enough.
		Spring Washer (C)
		Plane Washer (D)
		Wall Mount Bracket (E)
	Wall Mount Brackets	Example :
		A = B+C+D+E
		A: 11~13 mm.
		B: 7~9 mm.
		C: 1 mm.
	For Wall Mount assembly; please refer to the Installation Manual of the	D: 1 mm.
	Wall Mount Unit.	E: 2 mm.
		The screw type :Theread ISO M5 (Metric
	If the Wall Mount Bracket thickness is 1~3 mm. the original screws
		type, do not use Standard type).
	removed from the stand base can be used for the Wall Mount installation.

CAUTION

Insertion length (B) of the screws must be within 7~9 mm. If the length is less than 7mm, the weight can not be maintained. If the length is more than 9mm, a space is created between the Wall Mount Bracket and the Monitor. This length is very important.

	Tips to consider for the location of the Monitor.
3
			D o n o t b l o c k t h e
			ventilation holes . In
		More than	addition please keep a
			cetain distance around
		30 cm (1').	and make sure not to
			obstruct ventilation .
More than		Keep	Blocking the ventilation
10 cm (4").			holes might cause fire or
		more than
			defect.
		2 cm (0.8")
		away from
		the wall.

CAUTION If you purchased the Wall Mount unit, please ask for a professional installer. Do not install by yourself.

This ultrathin unit features an advanced ventilation system configured for vertical installation. A k n o w l e d g e a b l e a n d experienced professional technician can perform o t h e r m o u n t i n g o r installation orientations (e.g., horizontal, tilted) p r o v i d e d t h a t y o u specifically inform the technician of the unit's specialized ventilation needs. Call 800-HITACHI for additional info and guidance.

	Although this LCD Monitor can be installed using a variety of third party wall mounting brackets/devices, such
CAUTION
	third party brackets/devices have not been tested or approved by Hitachi for use or compatibility with this
	LCD Monitor. Accordingly, Hitachi accepts no responsability or liability for any injuries or property damage

resulting from the use of such third party brackets/devices. Hitachi strongly advises that any installation of this LCD Monitor using wall mounting brackets/devices be performed only by a qualified and experienced television installation technician who has completed a thorough evaluation of:

a)the weight-bearing strength and stability of the intended wall mount surface; and

b)the weight-bearing strength and compatibility of the intended wall mount brackets/device.

11