Hitachi UT32A302W manual Setup Operation Main Menu List

SETUP OPERATION (continued)

Main Menu List

			Menu	Page
	Picture Mode		Select between 3 picture modes according to the lighting condition.	33
	Contrast		Adjust to increase or decrease the picture contrast.	33
	Brightness		Adjust to brighten or darken the picture.	33
	Color		Adjust to increase or decrease the color density.	33
	Sharpness		Adjust to sharpen or soften the picture.	33
	Tint		Adjust to obtain natural skin color.	33
	Color Temperature		Select between 3 settings according to your preferred color tone.	33
	Back Light		Adjust to increase or decrease the brightness of back light on LCD panel.	33
Picture	Reset		Reset each item on the menu screen to the factory setting.	33
(HDMI/Composite)	Contrast Mode		Select between 3 contrast modes to suit your preference.	34
	3D Color Management		Adjust the suitable tint, color density, and brightness on image.	34
	Black Enhancement		Adjust the black level compensation.	34
	DNR		Reduce noise for picture signal.	35
	MPEG NR		Reduce mosquito noise in the picture.	35
	Film Mode		Adjust to make the moving image smooth.	36
	3D Comb Filter		Reduce the color blurring to reproduce purer color.	34
	Reset		Reset each item on the menu screen to the factory setting.	34
	Color Temp. Adjust		Set specific adjustment in each of 3 color temperature modes.	34
	Contrast		Adjust to increase or decrease the picture contast.	38
	Brightness		Adjust to brighten or darken the picture.	38
	Color		Adjust to increase or decrease the color density.	38
Picture(RGB)	Tint		Adjust to obtain natural skin color.	38
	Color Temperature		Select between 3 settings according to your preferred color tone.	38
	Color Temp. Adjust		Set specific adjustment in each of 3 color temperature modes.	38
	Back Light		Adjust to increase or decrease the brightness of back light on LCD panel.	38
	Reset		Reset each item on the menu screen to the factory setting.	38
	Treble		Adjust to increase or decrease the level of treble. (-15~+15)	-
	Bass		Adjust to increase or decrease the level of bass. (-15~+15)	-
	Balance		Adjust the balance of sound from the bottom right and left speakers. (-10~+10)	-
	Surround		Select surround-sound. (Off/On)	-
Audio	Bass Boost		Enhance bass sounds. (Off/On)	-
	Clear Voice		Select clearer and more realistic sounds. (Off/On)	-
	Perfect Volume		Adjust sound volume appropriately. (Off/On)	-
	Speakers		Select if using internal speakers. (Off/On)	-
	Reset		Reset each item on the menu screen to the factory setting.	-
	System		This function is not available.	-
		Auto Input Change	In response to the connected equipment (such as DVD) through HDMI cable, the	19
			monitor is automatically turned On and switched to HDMI input.
Function
	HDMI Control	System Standby	In response to the monitor, the connected equipment (such as DVD) through HDMI	19
			cable is automatically turned Off (standby mode).
		AV Center Control	Selecting On will activate AV Center OSD interface, in case you purchased the optional	19
			Hitachi A/V Center.
Setup	Video Power Save		Save power consumption when no signal can be input in HDMI/Composite input mode.	42
	RGB Input		Select the effective signal.	37
(HDMI/Composite)
	Color System		Select color system.	37
	Auto Adjust		Adjust Horizontal Position, Vertical Position, Horizontal Clock, and Clock Phase	39
			automatically.
	Horizontal Position		Adjust the display position horizontally.	39
	Vertical Position		Adjust the display position vertically.	39
	Horizontal Clock		Minimize the vertical stripes on the screen.	39
Setup(RGB)	Clock Phase		Minimize the blurring of the letters and stripes on horizontal row.	39
	Reset		Reset each item on the menu screen to the factory setting.	39
	Frequency Display		Set On for PC signal frequency information to be displayed on the Input Signal Screen	39
			Display.
	WXGA Mode		Select the resolution when WXGA signal is received.	39
	RGB Input		Select the effective signal.	39
Language	-			31

NOTE

The picture settings can be stored for each of inputs except “Picture Mode”.

ENGLISH

32