Hitachi UT32A302 manual Function Aspect Switching, HDMI/Composite Signal Input Position Adjustment

FUNCTION (continued)

Aspect Switching (continued)

HDMI/Composite Signal Input (continued)

Position Adjustment

Vertical picture position can be adjusted for Panoramic 1, Zoom 1 and Zoom 2 mode as follows.

1.Press the ◄► button while operating the picture aspect display.

2.“Position” display will appear.

3. Adjust the position using the ◄► button.

The adjustment ranges of each picture aspect are as shown below.

Display Aspect	Adjustable Range
Panoramic 1	-12~+12
Zoom 1, Zoom 2	-31~+31

Position + 31

Press▲

Position - 31

Press▼

CAUTION

Using a wide-screen monitor

The monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain

software, such as a TV program, the image would appear different from the original. Take this into consideration when making screen mode choices.

Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for commercial

or public viewing purposes could infringe on the copyright holder’s rights, which are protected by Copyright Law. When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the

peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image

reflecting the original intention.

RGB Signal Input

Display Aspect

You can select a suitable aspect depending on the resolution.

Normal	Full	Real*	* Real mode gives the image with same shapes as that of a
			computer monitor (neither compression nor stretching).This
			mode is not available if the input signal is 1280 x 1024 (SXGA).

Display Area Selection Diagram

Resolution			Input signal	Full display	Circular display
Display				Full	Normal	Real*
640 X 480	(VGA)
800 X 600	(SVGA)
1024 X 768		(XGA)
1280 X 1024 (SXGA)
640 X 400	(VGA)
1280 X 768		(WXGA)
1360 X 768		(WXGA)

41