Features

Before You Begin

Automatic Line Selection

You have Automatic Line Selection, if you hear dial tone and the [DN], Line, or Pooled Line Grp LED lights steady green. The LCD displays the station number (201) and the seized CO line (sample shown at right).

Lift the handset or press 6SNU.

You do not have Automatic Line Selection, if you hear silence.

Press an available [DN] or /LQH before dialing.

NO. 201

USING LINE 11

Ringing Line Preference

You have Ringing Line Preference, if you can answer a line ringing your station by lifting the handset or pressing 6SNU. You do not have Ringing Line Preference, if you have to press the button associated with the ringing call (flashing LED) to answer the call.

If your telephone does not have Automatic Line Selection, press the flashing [DN] or /LQH first, before using the handset or 6SNU.

Signaling

If you hear a long tone, followed by a caller’s voice, you have Voice First Signaling.

Talk in the direction of your telephone

...or answer the call as you normally would using either the handset or 6SNU.

If you hear successive ring tones, you have Tone First Signaling.

Lift the handset or press 6SNU.

Note You can change to the alternate signaling method when making a call on a call-by-call basis by pressing ￿ after dialing an internal telephone number.

16

Strata DK Digital Telephone 6/00

Page 28
Image 28
Toshiba 2000-series manual Automatic Line Selection, Ringing Line Preference, Signaling