Toshiba 2000-series Message Waiting Light on PhDN/MW, Message Waiting Light on Another Telephone

Features

Message Waiting

Message Waiting Light on [PhDN/MW]

➤ To respond to [PhDN/MW]

	1.	Press the flashing red	Your phone rings the station or voice mail device that
		[PhDN/MW] LED.	left the message. If the called party or VM device
			answers, the message waiting indication is cancelled
			automatically. If there is no answer, hang up and try at
			a later time. The red
			[PhDN/MW] LED on your phone continues to flash.
2.		After receiving the	If you have more messages, the red [PhDN/MW] LED
		message, press 6SNU	continues to flash. To answer the next message, repeat
		...or place the handset	this procedure.
		on-hook.
➤ To cancel [PhDN/MW]
1.		Press [PhDN].	You hear a steady dial tone.
2.		Enter ￿￿￿￿.	The dial tone stops.
3.		Press 6SNU.	The [PhDN/MW] LED turns OFF, indicating that the
			message has been canceled.

Message Waiting Light on Another Telephone

➤To set a message waiting light on another telephone

1.Press [DN] and dial an internal number.

2.Press 0VJ or ￿.

You hear ringback or busy tone.

The Msg or PhDN/MW] LED flashes red at the called telephone. The Msg LED lights steady red at your telephone. The LCD displays the station [203] where you set a message waiting light.

NO. 201 INT 203 MW SET

Strata DK Digital Telephone 6/00 59