Toshiba 2000-series Microphone Cut-Off, Off-hook Call Announce OCA, To turn the microphone ON/OFF

Features

Microphone Cut-Off

3. Press 6SNU.

The Msg LED on your telephone turns OFF. The Msg or [PhDN/MW] LED on the called telephone flashes until the called party presses the flashing 0VJ or [PhDN/ MW].

SENT 203

JAN 01 SUN 12: 19

➤To cancel a message light set on another station

➤Press [DN] and dial ￿￿￿ plus the [PDN] or [PhDN] that has the message light set.

Microphone Cut-Off

This feature prevents callers from monitoring the sounds near your telephone when your telephone receives a Handsfree Call or cuts-off the telephone microphone while on a speakerphone call. When the feature is ON, the Microphn Cut-off LED lights steady red and the Mic and Spkr LEDs do not light when your telephone is called.

When the feature is OFF, the Microphn Cut-off LED is not lit and your microphone works. The 0LFURSKQ￿&XW￿RII functions on Handsfree Answerback and speaker

OCA calls for privacy.

➤To turn the microphone ON/OFF

➤Press 0LFURSKQ￿&XW￿RII to toggle between ON/OFF.

Off-hook Call Announce (OCA)

This feature enables you to call and speak through either the handset or the speaker of an off-hook, busy digital telephone. The called station must be set in system programming for this feature to work.

The calling station can be set in system programming for OCA to occur automatically when calling a busy-off-hook station or by dialing an access code after receiving busy tone. Automatic OCA only functions on Voice First Signaling systems. The following procedure covers both calling options.

60 Strata DK Digital Telephone 6/00