Features

Direct Station Selection (DSS) Buttons (Hotline)

Direct Station Selection (DSS) Buttons (Hotline)

This optional feature enables you to use a '66 button to connect directly to another station’s [PDN]. The DSS LED shows the status (idle/busy) of the station and/or the station’s [PDN]. For example, a station’s DSS button LED shows busy (light steady red) when the station is:

busy on a call on any button or is in the DND mode.

idle but all appearances of the station’s [PDN] are in use by other stations.

To connect directly to another station’s [PDN]

1.When connected to a

CO line or another station, press '66.

2.Announce the call

...or transfer the call

by hanging up or pressing 5HOHDVH￿ DQG￿$QV.

The original party is put on-hold. You can call a station even if the DSS LED shows busy (steady red).

Note You can transfer the call to an idle or busy station.

Do Not Disturb (DND)

If your station is in the DND mode, internal, external and transferred calls do not ring your station and OCA calls are denied. You can continue to make calls while in the DND mode.

If your [PDN] or [PhDN] appears on other stations, calls to your [PDN] or [PhDN] flash on your station and flash or ring the other stations. This enables your calls to be answered at the other stations (or yours), even while your station is in the DND mode.

Your “alert partner” telephone can override DND and signal your telephone by pressing $OHUW￿6LJQDO. Telephones with DND Override can also call and mute ring

your telephone.

48

Strata DK Digital Telephone 6/00

Page 60
Image 60
Toshiba 2000-series manual Direct Station Selection DSS Buttons Hotline, Do Not Disturb DND