Features
Speed Dial
3.Speak in a normal voice level toward the telephone.
4.Press 6SNU to disconnect the call.
Note Your 0LF button must be set to be ON at the start of a call in system programming. If not, you must press the 0LF button before talking.
➤To answer an incoming call using speakerphone
1.With the handset on- hook, press the /LQH or [DN] with the flashing LED.
2.Speak at a normal voice level toward the telephone.
3.Press 6SNU to disconnect the call.
The Line or [DN] LED flashes green
Speed Dial
Speed Dial enables you to call a telephone number with a brief access code. There are two types of Speed Dial numbers:
♦Station – assigned by individual station users to their own station and can only be dialed from the station that assigns it.
♦System – only assigned from attendant consoles or a designated station (typically the System Administrator’s station), and can be used by other stations. (See System Administrator User Guide for storing instructions.)
Important! If you do not perform the following procedures within a specified time (set in system programming for either one or three minutes) when storing speed dial numbers, the operation times out and your telephone returns to idle mode.
70 | Strata DK Digital Telephone 6/00 |
