Toshiba 2000-series manual Remote Destination Change, To change the destination number

Features

Call Forward

Remote Destination Change

If Call Forward-External mode is set at your station, you can change the forwarding destination from a telephone outside of the system.

➤To change the destination number

1.Call into the DK system over a CO line programmed for the DISA feature.

2.After you receive dial tone, press ￿￿￿￿ then dial your [PDN].

3.Enter the Remote Call Forward-External security code.

You hear ringback tone signal, then internal dial tone for 10 seconds.

Try again if you hear busy tone.

Note See the System Administrator for DISA telephone numbers.

You hear a confirmation tone.

If a number is not dialed, the system automatically makes the DISA CO line ring as a normal incoming call. Then, if the call is not answered within 15 seconds after the ringing starts, it disconnects.

You hear a confirmation tone. See the System Administrator for the security code which is assigned to your telephone in system programming.

Strata DK Digital Telephone 6/00 35