Toshiba 2000-series manual 120, To use the External Microphone

Full-duplex Speakerphone

Dip Switches

Note The first four DIP switches are used to select the country, same as all other DK2000-series telephones. The default DIP switch settings (1~4) are preset to On for the USA and Canada. If you need to make adjustments for other countries, see Table 19 on Page 146.

➤To use the External Microphone

1.Plug in the RFDM External Microphone into the bottom of the telephone (see Figures 5 and 6).

2.Turn the microphone On by opening it (see Figure 7).

Note The High/Low switch works independently from the telephone’s speakerphone. This setting must be on High for proper operation.

Important!

●

●

●

The microphone has a narrow voice pick-up range so the front of the microphone should always point toward the person speaking (see Figure 8).

Be sure to place the microphone at least one foot from the telephone speaker and do not point the microphone toward the telephone speaker grille.

To use the external microphone in a conference room setting, place the microphone away from all parties to eliminate some of the directionality effect. Parties may have to speak up to be heard.

CAUTION! Avoid pulling the microphone cord excessively.

120 Strata DK Digital Telephone 6/00