Toshiba 2000-series manual Call Answering CO Line, Speed Dial, 130

Add-on Module/DSS Console

Features

2. Hang up.

Call Answering (CO Line)

The call rings the called station once with the camp-on tone. While the called station is receiving this tone, the Line LED flashes green (on-hold rate) or if you are on a [DN] button, it goes idle. The [DSS] LED remains steady red.

When the called station answers the transferred call, the Line LED becomes steady red. The [DSS] LED remains steady red.

Note If the busy station is in the DND mode, the call will not transfer, but will recall your telephone immediately.

If the call is not answered after a specified Recall time set in system programming, camp-on is cancelled and the transferred call rings back.

If your DADM or DSS console is equipped with a /LQH button, you can answer CO line calls from the DADM or DSS console as you would from a digital telephone. See Chapter 2 – Features for detailed information.

➤To answer an incoming CO Line call to a DADM or DSS Console

➤Press the flashing /LQH.

Speed Dial

Your DADM or DSS console may be equipped with 6' (Speed Dial) buttons that can be programmed to dial telephone numbers or to access features. 6' buttons on either the DADM or DSS console function like 6' buttons on digital telephones. See Chapter 2 – Features for information.

130 Strata DK Digital Telephone 6/00