Toshiba 2000-series manual 0LF

The Grand Tour

Buttons

Table 1	Fixed Button Definitions (continued)
	Button	Definitions
		If the held party hangs up, the call is released and the CO provides a hold-
		release signal.
+ROG￿(continued)		If your telephone is programmed for Automatic Hold, existing calls are
		automatically placed on hold when you answer a call or make another call. (See
		“Automatic Hold” on Page 26.)
		A different call can be held on each [DN] or
			CO LINE 02
		/LQH button on your phone. Each time you
			HOLD
		press 6FUROO, a different [DN] or /LQH is
		selected. The selected button’s LED flashes
		rapidly and your LCD displays information for
		the call holding on that button (samples shown	DN 202
		at right).	HOLD
		Press to toggle the microphone ON/OFF while the telephone is in use. The LED
		indicates the status of the microphone.
		The microphone and accompanying LED are always ON when receiving “voice
		first” internal [DN] calls to enable Handsfree Answerback and OFF if you receive
		a ring-first call. Mic may be ON/OFF when placing an on-hook CO line or
	0LF	internal [DN] call.
(Microphone)		Each station’s Mic can be set in system programming to switch ON/OFF with
		one touch, to switch OFF only while pressed and held, or to be either ON/OFF
		at the start of handsfree dialing.
		To talkback to an HS-OCA call, press and hold Mic and talk over your telephone
		handset/headset. The LED and microphone remain OFF during OCA talkback
		operation (see “HS-OCA” on Page 62).
		Mic functions on Handsfree Answerback and OCA calls for privacy.
	0VJ	When Msg LED flashes, press 0VJ to call back the station or voice mail device
		that activated the LED (see “Message Waiting” on Page 57). This is the
(Message)
		telephone’s [PDN] message waiting button.
		Press the same [DN] or /LQH that you used to dial the original number. Press
5HGLDO		5HGLDO. The last number called is redialed.
		If you have Automatic Line Selection, you must first lift the handset.

Strata DK Digital Telephone 6/00 5