Toshiba 2000-series manual Fixed Buttons

The Grand Tour

Buttons

Buttons

There are two sets of buttons, fixed and flexible. The fixed buttons (e.g., 0LF, 0VJ, 5HGLDO, +ROG, &RQI￿7UQ, 9RO▲, and￿9RO▼) are standard to every Strata DK 2000-

series telephone (see Table 1). The flexible buttons consist of Directory Number (Primary, Secondary, Phantom) and feature buttons. The number of preprogrammed flexible buttons varies by telephone.

Fixed Buttons

The fixed buttons are located on your dial pad and enable you to perform standard functions quickly and easily.

Table 1	Fixed Button Definitions
	Button	Definitions
&QI￿7UQ￿		Press to set up conference and transfer calls (see “Conference Calls” on Page
(Conference/
		45).
Transfer)
		Press once to hold internal or outside calls. The Line
			HOLD LINE 10
		LED flashes green at the internal hold rate.
			JAN 01 SUN 12:19
		...or press twice to enable Exclusive Hold. The Line
		LED flashes green at the exclusive hold rate.
		Exclusive Hold enables you to place a call on hold so that only you or somebody
		using a Call Pickup code at another station can retrieve it.
	+ROG	To retrieve a call on hold:
		Press /LQH or [DN] which is on hold
		...or if the call is on Exclusive Hold, from another station dial ￿￿ plus your [DN],
		or dial ￿￿￿￿ plus the CO line number (001~200) that the call is held on.
		If a call is not retrieved by a certain time (set in
			HOLD LINE 201
		system programming), it recalls back to your phone.
			LINE 10 RECALL
		You hear repeated recall tone (or if you are on the
		phone, you hear recall tone twice).

4 Strata DK Digital Telephone 6/00