Toshiba 2000-series manual Volume Controls, Using only Vol /Vol Feature Phone Comments Status

The Grand Tour

Volume Controls

Volume Controls

Your telephone has a volume increase and decrease button for controlling speaker and handset volume levels.

You must hold down either button (9RO ▲/9RO ▼) for at least 1/8 second for any volume change to occur. If you continually hold down either button, the volume continually changes about every half second until the level limit is reached.You hear ring tone as long as you press a Volume button when your telephone is idle.

The method for changing feature volume varies. Some features can be adjusted using only the 9RO ▲/9RO ▼ (see Table 4) and others require additional buttons (see Table 5 on Page 13).

Table 4	Using only Vol ▲/Vol ▼
	Feature	Phone	Comments
		Status
Ring Tone Volume/Incoming		On-hook,	Adjusting the ring tone volume also changes the volume
Handsfree Answerback and			level of incoming Handsfree Answerback and Speaker
		Idle
Speaker OCA			OCA calls before they are answered by pressing a [DN].
			After a call is terminated and the handset is on-hook, the
Handset Receiver		Off-hook	volume level returns to the “original” level for the next call.
			This “original” level can be adjusted to higher/lower in
			system programming.

12 Strata DK Digital Telephone 6/00