Hitachi UT32A302 Setup Menu, Auto Adjust, Horizontal Position, Vertical Position, Clock Phase

SETUP OPERATION (continued)

Viewing Images from a PC (continued)

Setting Picture Adjustment (continued)

wSetup Menu

Select “Setup” from the Menu list.

Setup
Auto Adjust		Adjust
Horizontal Position		0
Vertical Position		+31
Horizontal Clock		–20
Clock Phase		+10
Reset		Reset
Select	Return	Exit

Selected Items		Setup hint
		Adjusts Horizontal Position, Vertical Position, Horizontal
		Clock, and Clock Phase automatically.
		Select "Adjust" then press the OK button to start
Auto Adjust		automatic adjustment as necessary. The message “Auto
		Adjusting” is displayed.
		The image might not be adjusted to its optimum condition
		depending on the types of signals. In that case, adjust
		each item manually.
Horizontal Position		Adjusts the display position horizontally.
	-63~+63	When the value exceeds a possible range, it will be
		displayed in magenta.
Vertical Position		Adjusts the display position vertically.
	-31~+31	When the value exceeds a possible range, it will be
		displayed in magenta.
Horizontal Clock	-31~+31	Minimizes vertical stripes on the screen.
		Minimizes the blurring of letters and stripes on horizontal row.
Clock Phase		Be sure to adjust Horizontal Clock before adjusting Clock
	0~+63	Phase.
		When the value exceeds a possible range, it will be
		displayed in magenta.
Reset		Each item in Setup Menu can be restored to the factory
		setting by pressing the OK button.

Advanced Setting

Select “Setup” from the Menu list and skip to the second page.

Setup

Frequency Display

WXGA Mode

RGB Input

Select On/Off

Off

Off

RGB

Return

Selected Items		Setup hint
Frequency Display	Off	Set to On for PC signal frequency information to be
	On	displayed on the Input Signal Screen Display.
	Off
WXGA Mode	1280X768	Selects the resolution when a WXGA signal is received.
	1360X768
RGB Input	RGB	Selects the effective signal.
		Refer to 24 and 38 for details.
	Composite

39