Hitachi vl-21a Measurement Specifications, Environment Condition and Test, Interface

3. Measurement Specifications

See “Appendix 2” for Standard Measurement Condition and Measurement Procedure

4. Environment Condition and Test

Operating Condition	Temperature		-10°C ~ 60°C
	(Recommendation: -5°C ~ 50°C)
	Humidity	20% ~ 60%
Storage Condition	Temperature		-40°C ~ 60°C
	Humidity	0% ~ 90%

4.1 High Temperature Storage Test

In Storage condition at a temperature of 60°C for 72 hours, t hen leaving it at Normal Temperature for 8 hours, there will be no problem in performance.

4.2 Low Temperature Storage Test

In Storage condition at a temperature of -40°C for 72 hours, then leaving it at Normal Temperature for 8 hours, there will be no problem in performance.

5.Interface

5.1Pin Assignment

TTL Communication (10 Pin FFC Connector; Maker LinkWork 1.0mm Pitch, Upper Contact)

5.2 J204 - 10 Pin Connector

Pin	Name	I / O	Level
1	C Out	Output	Chroma Out
2	Y Out	Output	Luminance Out
3	Gnd		Video Ground
4	V Out	Output	Composite Video Output
5	12 V	Input	11.5 to 12.5 volts DC
6	Key 1	Input
7	Key 2	Input
8	RXD	Output	CMOS Level 5v (low: ≤ 0.8v, High: ≥ 3.7v
9	TXD	Input	CMOS Level 5v (low: ≤ 0.8v, High: ≥ 3.7v
10	Gnd		Power / Data Ground
		5v

5.3Line In Pulse (Ex, FV)

0v

200nsec min 60 Hz ±0.25Hz

*The 10 pin Connector (JAE) over the camera module is used for manufacturing. (Not for user)

5