I _........................... j
INOTE: counter changes to0000M when Cassette is ejected.
When the tape counter with memory indicationappears in the viewfinder, a tape that isbeing rewound
automatically stops when the counter reads approximately "0000M". This isuseful ifthere isa section of tape
you want to review immediately after recording or if you want to return to the same point several times ina row.
1 Press "DISPLAY". The tape counter and memory indicator "'M'" appear.
2. Start playing or recording a tape.
3. At the point you want playback to start, press "RESET" button to reset the counter to "0000M".
4. Continue to play or record.
5. Press "STOP/EJECT" button to stop playback, or press "REC/PAUSE" button to stop recording and place
"CAM/OFFNIDEO" in "VIDEO" position.
6. Press "REW/REVIEW". The tape will be rewound to the preselected point, at approximately "0000M"
indication.
[NOTE: The tape will also stop appr0ximately at '0000M during fast forward mode. ]
When "DISPLAY" is pressed so the display appears in the viewfinder, the tape remaining display shows the
remaining length of tape that can beused for recording and playback, using seven dashes. This feature is
handy when recording since it letsyou know how long you can record on the loaded tape.
Insert a cassette in the camcorder and start recording or playback; 10 seconds later, the remaining tape will be
displayed. When the cassette is ejected, the display will disappear. " _ ......... is displayed for 10 seconds
after the tape starts to run.
NOTES: , ]
• when the remaining recording tape time becomes less than about five minutes, TAPE END flashes in the