English
SPECIFICATIONS
Operating pressure | 70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm2) |
Dimensions | |
Length ⋅ Height ⋅ Width | (365 mm ⋅ 250 mm ⋅ 85 mm) |
|
|
Weight | 4.7 lbs. (2.1 kg) |
|
|
Nail capacity | 150 Staples |
|
|
| .037 ft3/cycle at 100 psi |
Air consumption | (1.05 ltr/cycle at 6.9 bar) |
| (1.05 ltr/cycle at 7 kgf/cm2) |
Air inlet | 3/8" NPT Thread |
|
|
STAPLE SELECTION
Only staples shown in the Table below can be driven with this Stapler.
Dimensions of staples
| 16 Gauge | 1" Crown | |
| Min. |
| Max. |
| .063" | (1.61mm) |
|
| 1"(25mm) |
| 2"(50mm) |
.917" | .057" |
| |
(1.45mm) |
| ||
(23.3mm) |
|
|
|
OPTIONAL ACCESSORIES
... sold separately
◯Sequential Trip Mechanism Kit (Code No. 876762) (Single Shot Parts)
◯Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder | (Code No.877153) |
4 oz. (120 cc) oil feeder | (Code No.874042) |
1 quart (1 ltr) can | (Code No.876212) |
NOTE: Accessories are subject to change without any obligation on the part of HITACHI.
APPLICATIONS
◯Insulation sheathing.
◯Wire lathing.
BEFORE OPERATION
Read section titled “SAFETY” (pages 4 – 6).
Make sure of the following before operation.
ACCESSORIES
WARNING
⬤Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
| 1 | 2 |
|
|
|
1 | Safety glasses | 1 |
|
|
|
2 | Allen wrench for M5 screw | 1 |
|
|
|
WORKING ENVIRONMENT
WARNING
⬤No flammable gas, liquid or other flammable objects at worksite.
⬤Clear the area of children or unauthorized personnel.
AIR SUPPLY
DANGER
⬤ NEVER use oxygen or other bottled gases. Explosion may occur.
— 8 —
