English
SPECIFICATIONS
Operating pressure | 70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm2) |
Dimensions | |
Length ⋅ Height ⋅ Width | (503 mm ⋅ 353 mm ⋅ 121 mm) |
|
|
Weight | 8.9 lbs (4.0 kg) |
|
|
Nail capacity | 64 – 70 nails (2 strips) |
|
|
| .095 ft3/cycle at 100 psi |
Air consumption | (2.7 ltr/cycle at 6.9 bar) |
| (2.7 ltr/cycle at 7 kgf/cm2) |
Air inlet | 3/8 NPT Thread |
NAIL SELECTION
WARNING
Be sure to use only the genuine HITACHI nails for the NR90AC3. The use of any other nails can result in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Min. | Max. | |
.286" | .327" | |
| ||
| (7 mm) | |
| (8.3 mm) | |
|
| |
| 1/2"(90mm) | |
|
| 3- |
| .113" | .162" |
| (2.9 mm) | (4.1 mm) |
ACCESSORIES |
|
|
| DANGER |
|
Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
|
|
| 1 | Safety glasses | 1 |
|
|
| 2 | Allen wrench for M8 screw | 1 |
|
|
| 3 | Allen wrench for M6 screw | 1 |
1 | 2 3 4 | 5 | 4 | Allen wrench for M5 screw | 1 |
|
|
| 5 | Nose Cap | 1 |
— 8 —
