Hobart 1612P manual Lubrication, Wear Adjustment

LUBRICATION

WARNING: UNPLUG MACHINE POWER CORD.

The carriage slide rod reservoir (Fig. 11) should be filled monthly with several drops of Lubriplate FM0-200-AW oil. A four-ounce container of this oil was supplied with the slicer. DO NOT use vegetable oil.

Occasionally, the gauge plate slide rods (Fig. 12) should be lightly coated with Lubriplate FM0-200- AW (4 oz. container supplied). Turn the index knob fully counterclockwise when lubricating these slide rods, and then turn it fully clockwise when finished. Wipe off excess lubricant.

DO NOT lubricate the meat grip slide rod (Fig. 12). It must be kept clean but not lubricated.

Meat Grip

Slide Rod Reservoir

Slide Rod

Gauge Plate

Slide Rods

PL-22247

PL-40620-2

Fig. 11 Fig. 12

Additional quantities of Lubriplate FM0-200-AW are available from your local Hobart Service Office.

The motor has sealed bearings and requires no lubrication maintenance.

WEAR ADJUSTMENT

After several years of operation and many sharpenings of the knife, it may become necessary to have the gauge plate adjusted closer to the knife. Contact your local Hobart Service Office if this service becomes necessary as it must be done by an authorized Hobart Service Technician.

FORM 19370 (4-95) – 8 – PRINTED IN U.S.A.