JVC LYT0002-0Y6A manual Tape Remaining Indicator, Brightness Control, Adjust Brightness

22EN

Tape Remaining Indicator

RECORDING (Cont.)

The time remaining on the tape is automatically monitored and displayed (☞ pg. 76). When the tape ends, “TAPE END” appears. If the indications are turned off, the tape remaining indicator appears when remaining time reaches 2 minutes.

Display

90 min

REC

89 min 3 min 2 min

blinking

0 min1 min

blinking blinking

BRIGHT – – – – –6– – – – –

MENU

IND.ON/OFF button

Select Dial

Brightness Control LCD Monitor/Viewfinder Indications

You can adjust the brightness of the LCD monitor by rotating the Select Dial.

You can make the LCD monitor/Viewfinder indications appear/disappear.

1 ADJUST BRIGHTNESS

If you want to brighten the image...

Rotate the Select Dial upward until the brightness indicator moves and the LCD monitor reaches its appropriate brightness.

If you want to darken the image...

Rotate the Select Dial downward until the brightness indicator moves and the LCD monitor reaches its appropriate brightness.

•The brightness indication appears in the LCD monitor.

1 PRESS IND.ON/OFF BUTTON When you do not want the indications to appear, press the IND.ON/OFF button for longer than approximately 1 second. Certain indications disappear.

Press again for longer than approx. 1 second to make the indicaitons reappear.

NOTE:

It is impossible to make the tape running indicator and warnings etc. disappear from the LCD monitor or the viewfinder. For the indications that can be removed, ☞ pg.76