EN 55
VCR/TV Connection (using Docking Station)
When you attach your camcorder to the Docking Station, you can add many interesting effects during playback.
To DC input jack
Core filter
To AC outlet
Power Dial
Multi connector
Power cord
Mark
Release button
To DCLock lever output jack
|
|
|
| NOTES: |
| |
| CONFIRM |
| ||||
1 Make sure the camcorder’s power is off. |
| ● When using the provided DC cord, make sure you | ||||
| connect the end of the cable with the core filter to | |||||
|
| ATTACH AND LOCKS |
| the Docking Station. The core filter improves | ||
2 First open the Multi connector cover (MULTI) |
| performance of equipment. | ||||
| ● Never touch the Multi connector on the | |||||
| on the bottom of the camcorder. Align the |
| camcorder located beneath the cover, or on the | |||
| mark on the camcorder with the one on the |
| ||||
|
| Docking Station, with your hand. If the pins are | ||||
| Docking Station and slide the camcorder in the |
| ||||
|
| damaged, the connectors will become unusable | ||||
| direction of the arrow. Slide the lock lever on |
| ||||
|
| due to contact failure. |
| |||
| the Docking Station in the direction of the |
|
| |||
|
| Charging The Camcorder Battery | ||||
| arrow until it clicks. The camcorder and the |
| ||||
| Docking Station are now securely attached. |
| If you attach the camcorder with the battery installed to | |||
|
|
|
| |||
|
|
|
| the Docking Station, you can charge the battery. Set the | ||
|
| •When removing the camcorder, press the | ||||
|
|
| Power Dial to “OFF”, then perform steps 1 through 3. | |||
|
| Release button and slide the lock lever in the |
| |||
|
|
| The Docking Station’s charger indicator starts blinking | |||
|
| opposite direction of the arrow and detach |
| |||
|
|
| to indicate that charging has begun. When it stops | |||
|
| the camcorder in the opposite direction of |
| |||
|
|
| blinking but stays on, charging is complete. | |||
|
| the arrow. |
| CHARGING TIME |
| |
|
|
|
|
| ||
| SUPPLY POWER |
| ||||
|
|
|
|
| ||
3 The Docking Station must be powered by the |
| BATT. PACK |
| CHARGE | ||
| AC adapter whether the battery is in the |
|
| approx. 2 hours | ||
| camcorder or not. |
|
|
|
| |
|
| •Do not attach or remove the battery while the | ||||
|
|
|
| |||
|
|
|
| camcorder is attached to the Docking Station. | ||
CONTINUED ON NEXT PAGE
