Hobart Champion 4500 manual Specifications, Symbol Definitions

SECTION 2 – DEFINITIONS

2-1. Symbol Definitions

	Engine Choke		Read Operator’s	A	Amperes	V	Volts
			Manual
	Engine Oil		Fuel		Battery (Engine)		Engine
	Positive		Negative		Alternating Current		Output
					(AC)
h		s
	Hours		Seconds		Time		Protective Earth
							(Ground)

Circuit Breaker

Temperature

SECTION 3 – SPECIFICATIONS

3-1. Weld, Power, And Engine Specifications

Welding	Weld	Rated	Maximum	Generator	Fuel
	Output		Open Circuit			Engine
Mode		Welding Output		Power Rating	Capacity
	Range		Voltage
		140 A, 20 V,
		30% Duty Cycle		Single-Phase,		Briggs & Stratton
		130 A, 25 V		4.5 kVA/kW (Surge)		Intek
				4 kVA/kW		Air-Cooled,
		30% Duty Cycle			1 gal (3.75L)
CC/AC	60 – 140 A		80	(Continuous)		One-Cylinder,
		110 A, 25 V,			Tank
				20/17 A,		Four-Cycle,
		60% Duty Cycle		120/240 V AC,		8 HP (305 CC),
		90 A, 25 V,		60 Hz		Gasoline Engine
		100% Duty Cycle

3-2. Dimensions, Weights, And Operating Angles

	Dimensions
Height	20-3/4 in (527 mm)		D
Width	22-3/4 in (577 mm)
Depth	31-1/4 in (793 mm)	B
A	31-1/4 in (793 mm)
B	10-1/2 in (268 mm)
C	13-45/64 in (348 mm)	A
D	22-3/4 in (577 mm)	C
E	1-3/4 in (44 mm)
F	19-1/2 in (495 mm)			G 4
G	13/32 in (10 mm) Dia.
				Holes
	Weight	E	F
	190 lb (86 kg)		Engine End	803 403

YDo not exceed tilt angles or engine could be damaged or unit could tip.

YDo not move or operate unit where it could tip.

°	15°
15
15°	15°

OM-4418 Page 9