SECTION 4 – INSTALLATION
4-1. Installing Welding Generator
Movement | Airflow Clearance |
| 18 in |
|
| (460 mm) | 18 in |
18 in |
| |
| (460 mm) | |
(460 mm) |
| |
|
|
18 in | 18 in | |
(460 mm) | ||
(460 mm) | ||
|
Location
YAlways securely fasten welding generator onto transport vehicle or trailer and comply
with all DOT and other applicable codes.
install1 11/02
4-2. Grounding Generator To Truck Or Trailer Frame
2
GND/PE3
Electrically bond generator frame to vehicle frame by
1
YBed liners, shipping skids, and some running gear insulate the welding generator from the ve- hicle frame. Always connect a ground wire from the generator equipment grounding terminal to bare metal on the vehicle frame as shown.
YAlways ground generator frame to vehicle frame to pre- vent electric shock and static electricity hazards.
1Metal Vehicle Frame
2Equipment Grounding Terminal
3Grounding Cable
Use #10 AWG or larger insulated copper wire.
YIf unit does not have GFCI receptacles, use GFCI- protected extension cord.
install1 11/02* – Ref. 151 556 /
