Hobart manual Fig. 32

– 12 –
CURTAIns AnD DRAInBACK PAns, MODel FT900D
Curtains and drainback pans must be in their proper places, Fig. 32 . . .
• Hang a short curtain at the unload side of every upper prewash, wash, power rinse and dual
rinse arm.
• If equipped with a blower-dryer, hang another short curtain after the nal rinse arm.
• Hang a long curtain on both sides of the prewash / wash section joint and the wash / power rinse
section joint.
• Hang two long curtains at the load end.
• Hang one long curtain at the unload end.
• Drainback pan locations are shown for reference only.
Fig. 32
TWO LONG & TWO SHORT
DRAINBACK PANS
WASH DRAINBACK PAN
WASH DRAINBACK PAN
DUAL RINSE ARM
POWER RINSE ARM WASH ARM PREWASH ARM
FT900D
R TO L OPERATION
8' CENTER SECTION
UNLOAD LOAD
DUAL RINSE
DRAINBACK PAN
FOUR SHORT
CURTAINS
AT UNLOAD SIDE
OF UPPER ARMS
THREE PAIRS OF
LONG CURTAINS
ONE LONG CURTAIN
AT UNLOAD END
FT900D
L TO R OPERATION
8' CENTER SECTION
TWO LONG & TWO SHORT
DRAINBACK PANS
FOUR SHORT
CURTAINS
AT UNLOAD SIDE
OF UPPER ARMS
DUAL RINSE
DRAINBACK PAN
ONE LONG CURTAIN
AT UNLOAD END
THREE PAIRS OF
LONG CURTAINS
FINAL RINSE ARM
SHORT CURTAIN
ONLY WHEN
BLOWER-DRYER
IS PRESENT
DUAL RINSE ARM
POWER RINSE ARMWASH ARM
PREWASH ARM
FINAL RINSE ARM SHORT CURTAIN
ONLY WHEN
BLOWER-DRYER
IS PRESENT
STRAINERS
STRAINERS