Hobart manual Fig. 34

– 14 –
Fig. 34
CURTAIns AnD DRAInBACK PAns, MODel FT900sD
Curtains and drainback pans must be in their proper places, Fig. 34 . . .
• Hang a short curtain at the unload side of every upper prewash, wash and dual rinse arm.
• If equipped with a blower-dryer, hang another short curtain after the nal rinse arm.
• Hang a long curtain on both sides of the prewash / wash section joint.
• Hang two long curtains at the load end.
• Hang one long curtain at the unload end.
• Drainback pan locations are shown for reference only.
FT900SD
R TO L OPERATION
4' CENTER SECTION
UNLOAD LOAD
DUAL RINSE
DRAINBACK PAN
THREE SHORT CURTAINS
AT UNLOAD SIDE
OF UPPER ARMS
ONE LONG CURTAIN
AT UNLOAD END
UNLOAD
LOAD
DUAL RINSE
DRAINBACK PAN
ONE LONG CURTAIN
AT UNLOAD END
FT900SD
L TO R OPERATION
4' CENTER SECTION
THREE SHORT CURTAINS
AT UNLOAD SIDE
OF UPPER ARMS
ONE SHORT
DRAINBACK PAN
ONE SHORT
DRAINBACK PAN
FINAL RINSE ARM
WASH ARM PREWASH ARM
FINAL RINSE ARM
WASH ARM
PREWASH ARM
DUAL RINSE ARM
DUAL RINSE ARM
TWO PAIRS OF
LONG CURTAINS
TWO PAIRS OF
LONG CURTAINS
SHORT CURTAIN
ONLY WHEN
BLOWER-DRYER
IS PRESENT
SHORT CURTAIN
ONLY WHEN
BLOWER-DRYER
IS PRESENT
STRAINER
STRAINER