Hobart Operation and Care of FT900 seRIes DIsHWAsHeRs, OPeRATIOn

– 3 –
pump Intake screens must be put on
holders at each pump intake (Fig. 1).
Fig. 1
strainer pans must be in place on top of
each tank (Fig. 2).
Fig. 2
End Caps must be correctly installed at
ends of all Wash Arms (Fig. 4).
Fig. 4
Wash Arms must be properly installed
and latched in place (Fig. 5).
Fig. 5
The Final Rinse Arm (and Dual Rinse Arm when
present) must be properly installed (Fig. 7).
Fig. 7
Curtains and drainback pans must be in their
proper places, refer to pages 11 – 14.
strainer Baskets must be in place in
strainer pans (Fig. 3).
Fig. 3
The Flush Arm at load end must be
properly installed (Fig. 6).
Fig. 6
Operation and Care of
FT900 seRIes DIsHWAsHeRs
sAVe THese InsTRUCTIOns
OPeRATIOn
MACHIne PRePARATIOn — Check before beginning operation.
Open the machine doors and make sure all components are in their proper operating positions.