Installation, Operation, and Care of
HEC20 & HEC20D
ELECTRIC CONVECTION OVENS
SAVE THESE INSTRUCTIONS
GENERAL
The model HEC20 Electric Convection Oven features a solid state
Model HEC20D has different controls than model HEC20. Models HEC20 and HEC20D are single cavity ovens, standard with door hinged on left; optional with door hinged on right.
The following leg or caster accessories are available: A set of four 4" (10 cm) adjustable chrome plated metal legs. A set of four 6" (15 cm) adjustable stainless steel legs. A set of 2 swivel and 2 rigid casters.
Stacking kit accessories are available for mounting one oven on top of another: One kit includes a set of four 165⁄8" (42.2 cm) adjustable metal legs. The other stacking kit is provided with casters.
An open storage stand in stainless steel is optional. Additional oven racks are available accessories.
Model HEC20D was originally built with a control described on pages
INSTALLATION
UNPACKING
Immediately after unpacking the oven, check for possible shipping damage. If this oven is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, verify that the electrical supply agrees with the specifications on the oven data plate, located inside of the top front cover.
Do not use the door or its handle to lift the oven.
LOCATION
The installation location must allow adequate clearances for servicing and proper operation.
INSTALLATION CODES AND STANDARDS
In the United States, Hobart electric ovens must be installed in accordance with: 1) State and local codes; 2)
In Canada, the ovens must be installed in accordance with: 1) Local codes; and 2) Canadian Electrical Code, CSA Standard C22.2 No. 1 (latest edition).
– 3 –
