Measure Clearance
Pour enough flour in the bowl to cover the bottom of the bowl where the beater travels. With the bowl fully raised (beater should not touch the bottom of the bowl), briefly run the mixer at the lowest speed.
Turn off the mixer, disconnect the electrical power supply, and measure the depth of flour where the beater has traced a path. This measurement should be taken at several points around the bowl to assure accuracy.
Adjust the Bowl/Agitator Clearance
• Remove the apron (which is secured by thumbscrews).
• Adjust the stop screw on right side.
- Loosen the bottom locking nut, (Fig. 9) and turn the stop screw counterclockwise to increase the clearance or clockwise to decrease the clearance.
- Tighten the locking nut while holding the stop screw.
• After the adjustments are made, replace the apron and secure it with the thumbscrews.
• Reconnect the electrical power supply.
• Carefully operate the bowl lift several times to
check the adjustment.
Fig. 9
– 19 –
