Manual 2 or 3 Stage Heating
Example: Heat for 1 minute 30 seconds at MEDIUM power (1st stage) and then heat for 2 minutes at DEFROST (2nd stage).
•Open the door and place food inside the oven. Close the door. The Timer display shows [ 0 ].
•Touch the POWER LEVEL pad until the indicator above MED is lit.
•Turn the Dial Timer until 1:30 is displayed.
•Touch the POWER LEVEL pad until the indicator above DEF is lit.
•Turn the Dial Timer until 2:00 is displayed.
•Touch the START pad. The cavity light comes on; heating begins. Total Time for both stages [ 3:30 ] displays and counts down. Stage number and Power level flash.
•When 2nd stage cooking begins, a single BEEP sounds.
•When the total time has elapsed, heating stops, BEEP sounds, and [ 0 ] will flash.
•Open the door. Remove the food.
•The previously selected power, time [ 3:30 ] and two stage indicators return to the display. Touch STOP / RESET to cancel, or place food in oven and touch START to repeat.
For 3 stage heating, select another power level and timer setting before pressing START.
While heating, one tap on the STOP / RESET pad stops the oven. Restart by pressing START or a second tap on the STOP / RESET pad will cancel the selected program. One tap on the STOP / RESET pad before the heating cycle is started will cancel the selected program.
REPEAT the same manually selected heating program by touching START within 1 minute if the door has been closed or within 30 minutes if the door has been left open. After 1 minute of
– 11 –
