Hobart HM1600 manual Programming Memory Pads for 2 or 3 Stage Heating

Programming Memory Pads for 2 or 3 Stage Heating

Example: Program memory pad A – 5 to DEFROST for 3 minutes and then to cook on HIGH power level for 2 minutes.

•Remove the left air filter (refer to Cleaning Air Filters for removal instructions). Press the PROG button. If no PROG indication appears in the display, Program Lock should be cancelled. Refer to Program Unlock.

–If you want memory pad A–5, press memory pad 5. The pad number, A–5, and the previously selected time and power level will appear in the display.

– If you want B – 5, press SHIFT A ▼B and then press memory pad 5.

•Press the POWER LEVEL pad until the indicator above DEF is lit.

•Turn the Dial Timer to the right until [ 3:00 ] is displayed.

•Press the POWER LEVEL pad until the indicator above HIGH is lit.

•Turn the Dial Timer to the right until [ 2:00 ] is displayed.

•Press the PROG button again. The total time for both stages [ 5:00 ] displays. You have completed programming memory pad A – 5 for 2 stage heating.

•Three seconds after programming has been completed, the display goes blank.

•Reinstall the left air filter.

For a 3 stage heating cycle, select the third power level and dial a time setting just before pressing the PROG button for the second time.

– 14 –