Programming Memory Pads
Example: To program memory pad A – 5 to DEFROST for 3 minutes.
•Remove the left air filter (refer to Cleaning Air Filters for removal instructions). Press the PROG button. If no PROG indication appears in the display, Program Lock should be cancelled. Refer to Program Unlock.
–If you want memory pad
– If you want B – 5, press SHIFT | A | ▼B | and then press memory pad 5. |
•Press the POWER LEVEL pad until the indicator above DEF is lit.
•Turn the Dial Timer to the right until [ 3:00 ] is displayed.
•Press the PROG button again. You have completed programming the selected memory pad for single stage heating.
•Three seconds after programming has been completed, the display goes blank.
•Reinstall the left air filter.
Once the memory B category has been selected, you can return to memory A only by pressing the STOP / RESET button.
– 13 –
