Hobart Welding Products 300 DC, 300 AC manual Selecting a Location, Dimensions And Weights

2-4. Selecting A Location

1

Movement

OR

1Lifting Eye

2Lifting Forks

Use lifting eye or lifting forks to move unit.

If using lifting forks, extend forks beyond opposite side of unit.

2

4

Location And Airflow

3

18 in

(460 mm)

18 in

(460 mm)

3Rating Label (Under Access Door)

Use rating label to determine input power needs.

4 Line Disconnect Device

Locate unit near correct input pow- er supply.

YSpecial installation may be required where gasoline or volatile liquids are present – see NEC Article 511 or CEC Section 20.

ST-800 402 / ST-130 172-C

2-5. Dimensions And Weights

A

B

C

D

Front

						Dimensions
					Height	30-3/4 in	(781 mm)
					Width	19-3/4 in	(502 mm)
	E
					Length	27-1/2 in	(698 mm)
					A	27 in (686 mm)
					B	26 in (661 mm)
		F			C	25-1/4 in	(642 mm)
					D	1-1/2 in	(38 mm)
				G
					E	1-1/8 (29 mm)
					F	17-7/8 (454 mm)
					G	19-1/4 (489 mm)
					H	1/2 in (13 mm) Dia
H 6 Holes
			Ref. ST-154 792-B			Weight
						370 lbs (168 kg)

OM-318 Page 11