3-7. Removing Existing Barrel And Installing Contact Adapter
4
1Base Nut Location Remove base nut from handle.
2Handle Section
Remove handle section from gun.
3Drive Roll Assemblies
Remove drive roll assemblies.
4Nut
5
3
2
Remove nut from barrel.
5 Barrel
Remove barrel from gun. Disconnect gas hose from gas nipple.
6Antirotation Pin
7Contact Adapter
1
4
6
7 | 3 |
2
Tools Needed:
12 mm
Remove antirotation pin from contact adapter.
Install contact adapter into gun, and secure with nut.
Reinstall drive roll assemblies. Reinstall handle section onto gun. Reinstall base nut onto handle.
802