Hobart Welding Products M-25 GUN, 2510 specifications Options and Accessories

Options and Accessories

BETA-MIG 2510

Olympic 30A Spool Gun #130 831-01-9

Ideal for aluminum welding jobs. 200 Amp, 100% duty cycle, air-cooled, 1 lb spool gun with 30 ft (9.1 m) cable assembly. Use with Spool Gun Module #043 084.

Spool Gun Module #043 084

Required if welding with spool gun. Provides a convenient way for you to plug in an Olympic 30A spool gun.

Spool Shaft for Use with 1 and 2 lb, 4 in (102 mm),

Welding Wire Spools #204 550

Double Gas Bottle Rack Kit #190 631

Drive Roll And Wire Guide Kits

Note Base selection of drive rolls upon the following recommended usages:

1V-Grooved rolls for hard wire.

2U-Grooved rolls for soft and soft shelled cored wires.

3U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).

4V-Knurled rolls for hard shelled cored wires.

5Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination with U-Grooved).

	Wire Diameter			Kit No.	Drive Roll		Inlet
Fraction		Decimal	Metric		Part No.	Type	Wire Guide
.023/.025 in.		.023/.025 in.	0.6 mm	087 131	087 130	V-Grooved	056 192
.030 in.		.030 in.	0.8 mm	079 594	053 695	V-Grooved	056 192
.035 in.		.035 in.	0.9 mm	079 595	053 700	V-Grooved	056 192
.045 in.		.045 in.	1.2 mm	079 596	053 697	V-Grooved	056 193

Ref. S-0026-B/7-91