Hobart Welding Products OM-2210 manual Installation, Specifications For CE Model

SECTION 3 – INSTALLATION

3-1. Specifications For Units Connected to a 20 Ampere, 115 Volt Circuit or a 10 Ampere, 230 Volt Circuit

	Amperes Input at						Rated
	Rated Output,					Plasma
							Cutting
	60 Hz, Single-Phase
			115 V	230 V	Plasma	Gas Flow/	Capacity	Max
Rated Output	115 V	230 V	KVA/KW	KVA/KW	Gas	Pressure	at 10 IPM	OCV
							115 VAC
					Air Or	4.5 CFM	Input: 1/4 in
21 A at 88 Volts DC At	25.3 max;	12.6 max;	2.9 KVA	2.9 KVA		(129 L/min)	(6 mm);	265 Volts
					Nitrogen
35% Duty Cycle	15 eff	7.5 eff	2.2 KW	2.2 KW		At 60 PSI	230 VAC	DC
					Only
						(414 kPa)	Input: 5/16 in
							(8 mm)

3-2. Specifications For Units Connected to a 30 Ampere, 115 Volt Circuit or a 15 Ampere, 230 Volt Circuit

NOTE

If the unit is operated from a 30 ampere, 115 volt circuit or a 15 ampere, 230 volt circuit, a different input power plug must be installed on the power cord. See Section 3-9 for instructions.

	Amperes Input at						Rated
	Rated Output,					Plasma
							Cutting
	60 Hz, Single-Phase
			115 V	230 V	Plasma	Gas Flow/	Capacity	Max
Rated Output	115 V	230 V	KVA/KW	KVA/KW	Gas	Pressure	at 10 IPM	OCV
27 A at 91 Volts DC At	33.6 max;	16.8 max;	3.8 KVA	3.8 KVA			115 VAC
35% Duty Cycle	19.9 eff	9.9 eff	3.1 KW	3.1 KW
					Air Or	4.5 CFM	Input: 1/4 in
21 A at 88 Volts DC At	25.3 max;	12.6 max;	2.9 KVA	2.9 KVA
						(129 L/min)	(6 mm);	265 Volts
					Nitrogen
60% Duty Cycle	19.6 eff	9.8 eff	2.2 KW	2.2 KW		At 60 PSI	230 VAC	DC
					Only
						(414 kPa)	Input: 5/16 in
17 A at 87 Volts DC At	20.9 max;	10.5 max;	2.4 KVA	2.4 KVA
							(8 mm)
100% Duty Cycle	20.9 eff	10.5 eff	1.8 KW	1.8 KW

3-3. Specifications For CE Model

	Amperes Input at
	Rated Output,
	50 Hz,					Plasma
	Single-Phase
					Plasma	Gas Flow/	Max	IP
Rated Output	115 V	230 V	KVA	KW	Gas	Pressure	OCV	Rating
115 VAC Input:
20 A @ 89 Volts DC			115 VAC	115 VAC
(20 A Input Circuit);
			Input: 3.1	Input: 2.4	Air Or	4.5 CFM
25 A @ 89 Volts DC
	26	17	(0.05*)	(0.04*)		(129 L/min)
(30 A Input Circuit);					Nitrogen		265 Volts DC	23
	(0.4*)	(0.2*)	230 VAC	230 VAC		At 60 PSI
230 VAC Input:					Only
			Input: 4.0	Input: 3.1		(414 kPa)
25 A @ 89 Volts DC;
			(0.05*)	(0.04*)
35% Duty Cycle In All
Cases
*While idling

OM-2210 Page 11