TROUBLESHOOTING TIPS
SYMPTOM |
| ACTION TO TAKE | |
Thermostat Dead |
| 1. | Check power to the thermostat |
|
| 2. | Check wiring diagrams |
|
| 3. | Check thermostat temperature sensor |
| Thermostat will not operate with a damaged temperature sensor. |
SYMPTOM |
| ACTION TO TAKE |
Fan, Heat, Or Cool | 1. | Check for break in G, W, or Y wire |
Inoperative | 2. | Allow minimum off time to pass |
| 3. | Check system options for correct settings |
| 4. | Remote system is overriding thermostat |
"REMOTE" is | displayed when system is overriding thermostat. |
SYMPTOM |
| ACTION TO TAKE |
Can't Adjust Temperature | 1. | Mode is Off (Select Heat, Cool, or Auto) |
| 2. | Check if thermostat keys are disabled |
To enable thermostat keys for test, remove jumper. | ||
|
|
|
SYMPTOM |
| ACTION TO TAKE |
Control By Remote System | 1. | Check Node ID |
Not Working | 2. | Check communications mode setting |
| 34. | Check setup of the remote system |
Ensure that all setup items for the thermostat and the remote system
are set to the proper configurations for communication.
SYMPTOM |
| ACTION TO TAKE |
Temperature Reading | 1. | Allow 30 minutes for thermostat to adjust to room |
Incorrect |
| temperature |
| 2. | Adjust calibration offset |
| 3. | Change setup option to display oF or oC |
After installation, allow the thermostat up to 30 minutes for an accurate temperature reading.
SYMPTOM | ACTION TO TAKE |
Display Problem | 1. Disconnect power to the thermostat. Reconnect, then |
| observe display |
For a 5 second period after power is reconnected, all segments of the display should light indicating all thermostat functions.
16