DATE & TIME SET PROCEDURE
1.To adjust the date/time, press the Set button 
, located on the back of the monitor.
2.The display will show a blinking number showing
the hour. Change the hour by pressing the 
button. Each press will increase the number by one
in a cycling manner. Press the Set button 
again to confirm the entry, and the screen will show a blinking number representing the minutes.
3.Change the time and date as described in Step 2
above, using the 
button to change the
numbers and the Set button 
to confirm the entries.
4.A “0” will reappear as the blood pressure monitor is ready for measurement again.
Press the 
button
blinking hour
increasing hour
confirm the entry
repeat process to set time and date
13
