Homelite UT08570 Assembly, See Figures 6, Cable Tie Straight Tube Straight Tube, Nozzle, Page

ASSEMBLY

ASSEMBLING HARNESS STRAPS

See Figures 6 - 7.

■Place short looped end of the harness strap through the top bracket. Open loop and slide onto extruded end of the bracket.

■Lace long end of the harness strap through the slot in the backpack frame.

■Thread the harness strap end through the center of buckle and then through the top toothed portion and tighten.

■Repeat steps to attach the second harness strap to the blower.

CAUTION:

Make all adjustments to the harness straps before starting the blower to avoid the possibility of injury.

ADJUSTING HARNESS STRAPS

Harness straps should be adjusted to a comfortable position before starting the blower.

To adjust the harness straps:

■Blower should be in operating position before adjusting the harness straps. Slip arm through harness strap and onto shoulder, then repeat for the other shoulder.

■Tighten or loosen each harness strap as needed, until they are adjusted to a comfortable operating position.

■Pull on harness straps to secure in buckle.

SMALL

CLAMP

CABLE TIE

STRAIGHT TUBE

STRAIGHT TUBE

		NOZZLE				Fig. 5
SHORT LOOPED			EXTRUDED
	END OF STRAP				END OF
				BRACKET

TOP BRACKET Fig. 6

SLOT IN

BACKPACK

FRAME

BUCKLE

Fig. 7

Page 9